Flame Retardant for Polypropylene Introduction: FR PP V2 is a new low-halogen environment-friendly flame retardant for polypropylene, with N, P, and Br for PP (UL94 V2). Test past: –UL94 V2 (1.5mm) –GWIT 750℃ –GWFI 850℃ –The bromine content can be 900ppm max, which can meet non-halogen standard of IEC 61249-2-21. Advantage: Compared with bromine-based flame retardant,…
Antioxidant BX AO PUR 67 Introduction BX AO PUR 67 is a novel liquid heat stabilizer blend for polyether and polyester-based flexible foams. It is a BHT-free blend containing a low amount of aminic antioxidants. used to replace BASF Irgastab PUR 67. Application: PUR 67 is particularly suitable for the stabilization of polyols used…
Flame Retardant for PP Plastic FR PP V0 NA Introduction: Flame Retardant for PP plastic FR PP V0 NA is a halogen-free environment-friendly LSHF flame retardant with N and P, a non-APP-based FR system. FR PP V0 NA has higher thermal stability and decomposition temperature. FR PP V0 NAB is more suitable for TPE, PE, and…
Polypropylene Flame Retardant(APP) FR PP V0 A Introduction: Ammonium polyphosphate APP(II.) is a series of phosphorus and nitrogen intumescent inorganic flame retardants. Among them, FR PP V0 A is a melamine-treated high polymerization degree crystalline type II ammonium polyphosphate product. The product has a high content of P and N flame retardant elements, good thermal…
Halogen Free Polypropylene Flame Retardant FR PP V0 GWFI Introduction: FR PP V0 GWFI is a halogen-free environment-friendly flame retardant with N and P for polyolefin. Especially for PP products, and can be used in other polyolefin products as well. Test past: –UL94 V0 (0.75mm) –70℃×168hrs water-immersion (UL746C) –GWIT 750℃ –GWFI 960℃ –free from the restrictions…
Antioxidant BX AO B1411 Introduction Antioxidant BX AO B1411 & B1412 are a blend of antioxidant 3114 and antioxidant 168. Specification: Appearance: white powderAsh: 0.10 % maxLoss on drying: 0.50 % max Transmittance(10g in 100 ml toluene) at 425 nm 95.0% min at 500 nm 97.0% min Melting range (℃) 183-223℃ Application Antioxidants AO B1411 &…
Antioxidant BX AO FS Introduction Antioxidant BX AO FS series 210/301/410/811 are blends of phenol-free antioxidants, and light stabilizers, provide outstanding processing stability to polyolefins while virtually eliminating any gas fade discoloration that may occur when phenolic systems are used. The system also provides both long-term thermal stability as well as a higher level of…
BX UV SEED Stabilizer Introduction BX UV Seed Stabilizer is a new type of multi-functional nylon additive, which can not only act as a light stabilizer when added to nylon products but also improve the processing stability of nylon, especially in nylon spinning, which can significantly reduce the broken filament rate; It can also improve…
Stabilizer Antioxidant BX AO H10 Introduction heat stabilizer BX AO H10 is a phosphorus-containing inorganic salt antioxidant, mainly used as a nylon antioxidant, which can greatly improve the High long-term thermo-oxidative aging properties (LTTS) and resistance to yellowing. Replace BRUGGOLEN H10. Specification: Appearance white crystalline powder Effective content ≥ 98.8% Melting point >200℃ Volatile matter…
Antioxidant BX AO 136 Introduction Antioxidant 136 A high-efficiency carbon-free radical scavenger, combined with phenolic and phosphorous acid antioxidants has a significant effect. It is very suitable for polyolefin, polycarbonate surface PC transparent back material, polyester, high-temperature adhesives, lubricants and high-temperature processing aids of polyamide PA6 and PA66. As a carbon center free radical scavenger,…
