Tinuvin UV B75

Introduction

UV B75 is a liquid heat and light stabilizer system designed for use in polyurethanes such as reaction injection molded (RIM) polyurethanes and thermoplastic polyurethanes (TPU). Also used in sealant and adhesive applications for polyurethane coatings on tarpaulins, floors and synthetic leather.

Features and advantages

UV B75 protects against processing, light, and weather-induced degradation of polyurethane products such as shoe soles, instrument and door panels, steering wheels, window trim, headrests, and armrests.
UV B75 can be easily added to aromatic or aliphatic polyurethane systems for thermoplastic moldings, semi-rigid integral foams, in-mold skins, and coating applications. It can be used with natural and colored materials.
UV B75 is particularly suitable for preparation for use in the above systems.
• Easy to pump, pourable liquids that allow for dust-free handling, automated dosing, and reduced mixing times
• All liquid packaging; no additive precipitation in the polyol phase at low temperatures
• Resistance to exudation/crystallization in many PUR systems

Specification:

Boiling point > 200°C
Flashpoint > 90°C
Density (20°C) 0.95 – 1.0 g/ml
Solubility (20°C) g / 100 g solution
Acetone > 50
Benzene > 50
Chloroform > 50
Ethyl acetate > 50
Water <0.01

Chemical Name:

A synergistic blend of 20% BX 1135 + 40% UV 571 + 40% UV 765.

Synonyms:

BASF Tinuvin B75

Application:

recommended dosage as follows

Adhesive 0.5% – 1.0%
Sealant 0.2% – 0.5%

UV B75 is used at levels between 0.2% and 1.5%, depending on the performance requirements regarding the substrate and end application:
Reactive two-component integral foam 0.6% – 1.5%

Handling and Safety:

For additional handling and toxicological information, please consult us for Maternal Safety Date Sheet.

Package:

25kg/drum, 500-600 kg per pallets. Non-dangerous goods